袋式過濾器
Bag Filter
【基本說明】:
袋式過濾器一種結構新穎、體積小、操作簡便靈活、節能、高效、密閉工作、適用性強的多用途過濾設備。袋式過濾器內部由金屬網籃支撐濾袋,液體由入口流進,經濾袋過濾后從出口流出,雜質攔截在濾袋中,更換濾袋后可繼續使用。
Basic Specification:
Bag filter is a multi-purpose with novel structure, small volume, easy to operate, energy-saving, high efficiency, closed operation and strong applicability. The inner of the bag filter is supported by a metal mesh basket, and the liquid flows in from the inlet, then flows out from the outlet and the filtration is completed. The impurities are intercepted in the filter bag, and the filter can continue to use by replacing the filter bag.
【結構及工作原理】:
袋式過濾器是一種壓力式過濾裝置,主要有過濾筒體、過濾筒蓋和快開機構、不銹鋼濾袋加強網等主要部件組成。
濾液由過濾器外殼的旁側入口管流入濾袋,濾袋本身是裝置在加強網籃內,液體滲透過所需要細度等級的濾袋即能獲得合格的濾液,雜質顆粒被濾袋攔截。該機更換濾袋十分方便,過濾基本無物料消耗。
Structure and working principle:
Bag filter is a kind of pressure filter device, which mainly consists of filter cylinder body, filter cylinder cover, quick opening mechanism, stainless steel filter bag reinforcement net and other main components.
The filtrate is flowed into the filter bag by the side inlet pipe of the outer covering. The filter bag itself is installed in the reinforcing basket. The qualified filtrate can be obtained by the filter bag with the required fineness grade for liquid penetration, and the impurity particles are intercepted by the filter bag. It is very convenient to replace the filter bag, and basically no material consumption during filtration process.
【主要特點】:
■ 濾袋側漏機率小,有力地保證了過濾品質。
■ 袋式過濾可承載更大的工作壓力,壓損小,運行費用低,節能效果明顯。
■ 濾袋過濾精度不斷提高,已達到0.5μm。
■ 袋式過濾處理量大、體積小,容污量大。
■ 過濾器濾袋清洗后可反復使用、節約成本。
■ 袋式過濾應用范圍廣,使用靈活,安裝方式多樣。
Main features:
● Small side leakage rate of the filter bag, high filter quality is effectively guaranteed.
● Greater working pressure, less pressure loss, low operating cost and energy-saving.
● Filtering accuracy continuously improved up to 0.5 um.
● Large capacity, small volume and large contamination capacity.
● Repeatedly use of filter bag by cleaning, cost saving.
● A wide range of applications, flexible use and various installation methods.
【產品分類】:
Product classification:
名稱 | 型號 | 說明 |
單袋龜背式過濾器 | BT | 適用小流量較高精度 |
單袋凹蓋式過濾器 | BC | 適用高壓力 |
單袋平蓋式過濾器 | BF | 適用粘度偏低 |
塑膠注塑式過濾器 | BP | 適用強酸強堿、氯離子等 |
普通多袋式過濾器 | BO | 適用大流量無需經常更換濾袋 |
速開多袋式過濾器 | BQ | 適用大流量需經常更換濾袋 |
【行業應用】:
■ 石油化工:濾潤滑油,石油產品,如分離苯聚合物、回收催化劑,催化油漿過濾,;
■ 涂層:電泳油漆過濾、超濾保護過濾、脫脂過程中過濾、磷化液體的過濾,;
■ 食品和飲料:用碳截留糖油墨和助濾劑、食用油
■ 造紙,高壓清洗,電子,電鍍等
Industry applications:
● Petrochemical industry: filter lubricants, petroleum products, such as separation of benzene polymers, recovery of catalysts, catalytic slurry filtration;
● Coating: electrophoretic paint filtration, ultrafiltration protection filtration, filtration in degreasing process, filtration of phosphating liquid;
● Food and beverage: use carbon to intercept sugar ink and filter aid, edible oil
● Paper making, high pressure cleaning, electronics, plating, etc.
【參數表】:
Parameter table:
型號 | 袋數 | 過濾面積 | 筒體直徑 | 設備高度 | 進出口尺寸 size | 流量 |
B1P3S | 1 | 0.1 | 114 | 360 | 1寸 | 8 |
B1P4S | 1 | 0.2 | 114 | 520 | 1寸 | 15 |
B1P1S | 1 | 0.3 | 200 | 600 | DN50 | 20 |
B1P2S | 1 | 0.5 | 200 | 995 | DN50 | 40 |
B2P2S | 2 | 1.0 | 400 | 1130 | DN80 | 80 |
B3P2S | 3 | 1.5 | 450 | 1150 | DN100 | 120 |
B4P2S | 4 | 2.0 | 500 | 1315 | DN100 | 160 |
B5P2S | 5 | 2.5 | 550 | 1355 | DN80 | 200 |
B6P2S | 6 | 3.0 | 600 | 1390 | DN125 | 240 |
B7P2S | 7 | 3.5 | 650 | 1410 | DN100 | 280 |
B8P2S | 8 | 4.0 | 700 | 1458 | DN100 | 320 |
B10P2S | 10 | 5.0 | 800 | 1510 | DN125 | 400 |
B12P2S | 12 | 6.0 | 850 | 1555 | DN125 | 480 |
B14P2S | 14 | 7.0 | 950 | 1580 | DN150 | 560 |
B16P2S | 16 | 8.0 | 1000 | 1580 | DN150 | 640 |
B18P2S | 18 | 9.0 | 1100 | 1580 | DN150 | 720 |
B20P2S | 20 | 10.0 | 1150 | 1580 | DN150 | 800 |
B22P2S | 22 | 11.0 | 1200 | 1580 | DN150 | 880 |
B24P2S | 24 | 12.0 | 1250 | 1580 | DN150 | 960 |
1、濾袋:可適用于1#、2#、3#、4#濾袋 | ||||||
2、精度范圍:0.2-1000μm | ||||||
3、流量范圍:≤1080m3/h | ||||||
4、單機濾袋數量:1-32 | ||||||
5、材質:304/316L/2205等 | ||||||
6、表面處理:噴砂,噴漆,拋光,防腐涂層等 | ||||||
7、流量是處理水時的參考值,實際值會因液體的粘度、雜質含量和壓差變化而不同。 | ||||||
|
|
|
|
|
|
|
如需其它規格,可聯系我司技術人員咨詢! |
【選型說明】:
Selection explanation:
B1P3S - BS - F50 - 304 - PN10 - PS | |||||
型號 | 子型號 | 接口尺寸 Interface size | 殼體材質 Shell material | 壓力等級 Pressure grade | 表面處理 |
B1P3S | BT | F:法蘭連接 | 304 | PN6 | PS:噴砂 |
BC | |||||
BF | |||||
BP | |||||
B2P2S | BO | ||||
BQ |