Standard: According to IEC 61215,UL1703,IEC 62782 standard requirement |
Purpose: This test is to determine the ability of the module to withstand wind,snow,static or ice loads. |
1.The machine table apperance dimension:L280*D180*H195cm |
2.Test Positive load 1000Pa,reverse load:5600Pa(Pressure can setting) |
3.Cycle times:free setting |
4.Dynamic load test frequency:7s±3s |
5.Dynamic load:1000Pa,1000times. |
6.Pressure control accurate:5% |
7.Pneumatic and force value feedback ways:low friction force cylinder,tensile pressure sensor(accurate 0.1N) |
8.Aluminum profile structure feature:platform and support frame arent deformation under suffer force situation |
9.The maximum test dimension:2000mm*1000mm(can accoding to customer's requirement to customized) |
10.Customization test platform fixture,according to determiand install ways to do adjust |
11.Current continuity system:DC power,DC 120V/10A,real-time monitor module inner current continuity |
12.Cylinder:4 groups,in total 8 pieces Single the maximum output>200kg Telescopic stroke:125mm |
13.Sucker:8 groups,in total 32 pieces |
Sucker diameter:120mm |
Sucker(with cylinder) |
Sucker can rotation angle≥15° |
14.Operate system |
14.1.Computer control software research and development by HOTOTECH,easy operate and stability. |
14.2.Software with Chinese and English language,can change each other. |
14.3.Real-time show pressure,deformation,test time,cycle times,current continuity |
14.4.Real-time draw and show pressure and deformation value. |
14.5.Real-time show every cylinder force value and draw force value curve |
14.6 Testing data real-time save,inquiry and print |
14.7.Testing data export is World,Excel,PDF,JPG etc format |
14.8.Fault alarm function |