Testing Standard It's conform IEC61215-2:2016 testing standard
Purpose It's to determine the ability of the module to withstand thermal mismatch, fagigue and other stresses caused by repeated changes of temperature
The Mainly specifications
Temperature range
-40 ~ 85oC
Temperature fluctuation
≤±1oC
Temperature deviation
≤±1oC
Temperature uniformity
≤±2oC
Rise and down speed rate
Satisfy IEC61215-2:2016
Humidity range
30%~98%
Relative humidity devication
±3%FS, deviation 85±2%RH, 90±2%RH
Humidity fluctuation
±2%RH
Thermal cycle testing
Module surface temperature change rate should not more than 1000oC/h limit temperate the lowest maintain time is 10 min, one test is 200 times or 50 cycles
Testing sample quantity
8 pcs ( It's can customized)
Inner and outer chamber material
Stainless steel
real-time curve display
will display program set time, adjust curve sample rate record cycle, display set valuee curve and actural running value curve
Communicate interface
RS-485 coommunicate interface, match on line software can connect to the computer, data save and humidity value
Humanixed operation interface automatic control
Refrigeration compressor, automaitc energy valve , temperatuare , humdiity, electric heating etc
Independent control
the program controller will heat up/humidification/dehumidification/cooling etc function complete independent control , save the energy
Language
Chinese and English, can change each other
Power down
power down reset and power down memory function
Thermal insulation material
High density hard PU foam and glass insulation cotton