UV Aging Tester for PV Module Stadnard It's according to IEC61215-2-2016, IEC61646 etc International standard
UV Aging Tester for PV Module purpose It's to precondition the module with ultra-violet (UV) radiation before the thermal cycle/humidity freeze test to indentify those materials and adhesive bonds that are susceptible to UV degradation
UV Aging Tester for PV Module specifications
Use maerial
can completely obstruct ultraviolet rays, tightness, good thermal insulation's high quality material
Irradiation area
2000×2000mm
Testing sample quantity
2PCS
Light source life
2000 hours, Germany brand Holen
Single lamp UVA and UVB relative energy rate
UVB approx occupy total enery 3%~10%
Irradiation strength
Wavelength 280nm~385nm's irradiation strength can reach about 100W/m2,280nm~320nm≤1%, promise the test cycle reduce as far as possible
Irradiance uniformity
Be better than±15%
Monitor and show ways
Real-time monitor and show UVA and UVB strength
UVA wavelength
320~385nm
UVB wavelength
280~320nm
Module surface temperature
60oC±5oC
Temperature resolution
0.1oC
Ozone
Almost no ozone is produced
Light ways
upper light, module test plane vertical light source
Control ways
Touch screen
Electricity
380V 60HZ
UV Aging Tester for PV Module's appearance and details image display