高溫等離子焚燒技術：
工業廢氣在反應器中經過壓縮、高壓聚能放電成為3千多的高溫等離子態氣體，此時反應器的壓力增高，氣體的體積急劇膨脹，在極短的時間里工業廢氣中的有害物質被裂解，其中有機成分被裂解為基本粒子，無機物質還原為單體元素，實現無污染排放。
“高溫等離子焚燒"技術有以下優勢：
1、連續不間斷的處理廢氣。
2、廣譜性。
3、不消耗天然氣，無碳排放問題。
4、風阻小，能耗低。
5、能效比高。
6、處理效果好。
7、無臭氧排放問題。
8、經濟適用。
9、占地面積小，自動化程度高節約人力，運營成本低。
10、不會產生二次污染。無異味，對人口居住密集地區而言這是一個重要的考量指標。
11、天燃氣焚燒法RTO造價高昂，大量消耗天燃氣、氧氣，增加二氧化碳、一氧化碳排放，有二次污染之慮，無法應對日漸嚴格的環境保護標準。
高溫等離子焚燒技術：
采用非可燃氣體技術（無須通入空氣），可以高效和潔凈地處理廢氣。等離子體工作區的溫度在3000℃以上，它減容比高達97%。高溫等離子體焚燒技術可以實現減量、無害、近于。
高溫等離子焚燒處理設備特點：
1.高效處理： 強大的功率和專業的設計使工業廢氣瞬間成為具有3千多度的高溫等離子體，有害物質清除率大于98%，符合排放標準。
2.不銹鋼一體化結構， 耐腐蝕；安全可靠，維護方便。
3. 智能化遠程控制，無需專職人員值守。
High-temperature plasma incineration technology:
Industrial waste gas in the reactor is compressed, high-pressure polyethylene can discharge a high temperature of more than 3,000 plasma-forming gas, at this time the reactor pressure increased, the rapid expansion of the volume of gas in a very short time in industrial emissions of harmful substances was completely cleaved, wherein the organic component is cleaved into elementary particles, inorganic substances reduced to single element, non-polluting emissions.
"High temperature plasma burning" technology has the following advantages:
1, uninterrupted treatment of exhaust gas.
2, broad-spectrum.
3, do not consume natural gas, no carbon emissions.
4, wind resistance, low energy consumption.
5, high energy efficiency.
6, good effect.
7, no ozone emissions.
8, affordable.
9, small footprint, high degree of automation to save manpower and low operating costs.
10, does not produce secondary pollution. No smell, densely populated area in terms of this index is an important consideration.
11, gas incineration RTO high cost, large consumption of natural gas, oxygen, increased carbon dioxide, carbon monoxide emissions, taking into account the secondary pollution, unable to cope with increasingly stringent environmental protection standards.
High-temperature plasma incineration technology:
Non-combustible gas technology (do not pass into the air), you can efficiently handle and clean the exhaust gas. Temperature plasma workspace above 3000 ℃, its volume reduction ratio of up to 97%. High temperature plasma incineration technology can achieve reduction, harmless, near-zero emissions.
High-temperature plasma incineration equipment features:
1. Efficient Processing: powerful and professional design of the power of industrial waste gas has become an instant more than 3,000 degree heat plasma clearance of harmful substances more than 98%, in line with national emission standards specified.
2. The integrated structure of stainless steel, corrosion-resistant; safe, reliable, easy maintenance.
3. The intelligent remote control, no full-time staff on duty.
