2006年初,中國國家食品(SFDA)與布魯克光譜儀器公司簽訂協議,訂購總金額超過1500萬美金的傅里葉變換近紅外光譜儀,用來進行藥品的快速篩查。這是該領域大的一筆采購項目。 榮獲R&D100金獎的MATRIX™-F是新一代傅立葉變換近紅外光譜儀的代表。它是臺工業強化級的傅立葉變換近紅外光譜系統,能夠在各種惡劣的環境中工作。該儀器裝配了的光學系統,以保證高靈敏度、高穩定性。該創新性系統的設計不但可以確保結果的準確性和一致性、提高了工作效率,輕松實現模型的傳遞和轉換,可以完成一些靈敏度低、準確性差的儀器所不能檢測的工作。此外,同一臺儀器能夠直接實現從實驗室到工廠的應用,極大的簡化了將實驗室方法用于實際過程控制系統的轉換需求。工業標準的通訊協議支持接口使得連接、遠程控制更加簡單化。 從原始材料的鑒別到成品的質量控制,MATRIX™-F都可以針對您的需要提供完善的解決方案。通過內置和外聯的多光線接口,一臺儀器可以獨立控制多達48條光纖。光纖探頭適用范圍廣,既可用于粉末狀、球狀樣品的檢測,也可用于液體、乳狀液濃度的測定。 MATRIX™-F在實驗室中也有廣范的應用??梢韵葘⑵渥鳛楠毩⑾到y用于方法開發,再直接應用于過程控制。MATRIX™-F及其外圍附件可以相互獨立的安裝在19英寸的標準工業機柜內。 MATRIX™-F設計可靠、維護便捷。預準直的光源,用戶快速更換后無需調整光路。而且,所有的易損件和電路系統都是被置于各自獨立的模塊之中,因此自己更換部件時不會對密閉、干燥的光學系統產生影響。在線診斷可以實時監控整個儀器系統的工作狀況,實時提示用戶儀器所出現的故障。通過運行校驗軟件,自動驗證儀器的性能指標,確保整個系統的正常工作。所有這些說明了儀器能夠在運行過程中進行快捷維護并回到正常運行狀態,保證工業控制的正常運行。 On-line FT-NIR Analysis The award winning MATRIX-F FT-NIR spectrometer allows the direct measurement in process reactors and pipelines, leading to a better understanding and control of the process. Accurate in-line results in seconds Multiple components per measurement Non-destructive analysis Optional built-in 6-port multiplexer Direct method transfer Rugged design Ethernet connectivity and industry standard communication protocols Request more Information Real-time FT-NIR The advantages of real time, on-line FT-NIR analysis have been well established. However, conventional spectrometers can only be installed close to the process that they are monitoring, which makes the analyzer be exposed to a hostile environment, like drastic temperature changes and exposure to dust and dirt. Furthermore, the instrument needs to be positioned in hard-to-access and often Ex-protected area. By using fiber optics technology, the difficult to reach measurement points can be accessed by industry hardened fiber optic probes, while the MATRIX-F is positioned, e.g. in an analysis house. Bruker Optics offers complete solutions for various on-line analysis tasks. Maximum Utility The MATRIX-F is the only FT-NIR spectrometer which can measure material in contact as well as contactless with just one instrument using light fiber technology: Fiber Optic Probes: Classic diffuse reflectance, transflectance or transmission probes with various path lengths can be adopted as well as process flow cells or pilot plant assemblies. Various probe materials are available, like stainless steel or Hastelloy. Heads for Contactless Measurements:The fiber optic NIR illumination and detection head contains tungsten sources which illuminate the sample. The scattered light is collected and guided via a fiber optic cable to the spectrometer. This way, a contactless measurement can be performed remotely, opening a whole array of new applications. Up to six heads can be connected to one MATRIX-F emission or MATRIX-F duplex spectrometer. |