污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
無錫耐玖機電設備有限公司
無錫耐玖機電設備有限公司
暫無信息 |
JT6532精密齒輪式多軸攻絲機(多軸器)JT6532精密齒輪式多軸攻絲機特點：◆回轉一牙距的精密自動輸送組合：裝置可替換的A、B齒輪配合A、B軸軸與主軸依牙距推進配合(以往沒有這種裝置)，這種組合有以下優點：1.垂直穩定、**而安全：精密度相當高，絲攻在前進與后退時不必出力就能運轉自如，而產制優良的加工物品，不會造成精細不同的螺紋產，對薄板的沖床加工制品或輕合金屬，合成樹脂等軟質制品也能制成......
JT6532精密齒輪式多軸攻絲機(多軸器)
JT6532 Precision Gear Multiaxis Raiders(Multishaft)
JT6532精密齒輪式多軸攻絲機特點：
◆回轉一牙距的精密自動輸送組合：
裝置可替換的A、B齒輪配合A、B軸軸與主軸依牙距推進配合(以往沒有這種裝置)，這種組合有以下優點：
1.垂直穩定、**而安全：精密度相當高，絲攻在前進與后退時不必出力就能運轉自如，而產制優良的加工物品，不會造成精細不同的螺紋產，對薄板的沖床加工制品或輕合金屬，合成樹脂等軟質制品也能制成上乘的螺紋。*品質不穩定或不佳現象產生。
2.采用等距攻牙，工件不會往上跳。
3.采用等距攻牙，工件不用壓緊，裝夾簡便、效率高
◆可高速連續循環運轉，堅固耐用：
采用特殊馬達、電子按鍵，能耐用一千萬轉次。
◆JT6532精密齒輪式多軸攻絲機型適合加工M10-M32螺紋孔。配合多軸器使用，可以加工M10-M32之間的螺紋孔攻牙作業。
JT6532 Precision gear type multi-axis wire tapping machine characteristics:
Precision automatic transfer combination of a tooth pitch:
The substitutable A and B Gears of the device are fully matched with the shaft of the A and B shaft and the spindle according to the tooth distance propulsion(there was no such device in the past). This combination has the following advantages:
1. Vertical stability, accuracy, and safety: The precision is quite high, and the silk attack can operate freely without having to work hard when moving forward and retreating. The production of fine processed items will not result in fine and different spiral production, and the punch of thin plates. Processing products or light metals, Soft products such as synthetic resins can also be made into perfect threads. There is no instability of quality or undesirable phenomena.
2. Using equidistant teeth, the workpiece will not jump up.
3. Using equidistant teeth, the workpiece does not need to be pressed, and the clamp is simple and efficient.
High speed continuous cycle operation, strong and durable:
With special motors and electronic keys, it can last 10 million turns.
The <unk> JT6532 precision gear multi-axis tapping machine is suitable for processing M10-M32 thread holes.</unk>
| 規格 | JT-6532 |
|
| 主軸*大行程 | 65MM | |
| 旋徑mm | 460 | |
| 螺牙直徑mm | Φ10-Φ32 | |
| 頭部上下動距mm | 450mm | |
| 主軸端至工作臺面距離mm | 600mm | |
| 工作臺尺寸mm | 340×380 | |
| 功率 | 3相 6P 1.5Kw | |
| 主軸轉速（50HZ) | 50,100,200 | |
| 主軸轉速（60HZ) | 60,120,240 | |
| 螺距mm | 1.5,1.75,2.0,2.5,3.0,3.5 | |
| 多軸*大攻牙 | M10×10軸，M16×4軸，M20×2軸 |
JT6532精密齒輪齒輪式多軸攻絲機可配合多軸器進行多孔同時攻牙作業。The JT6532 precision gear type multi-axis attack wire machine can cooperate with the multi-axis device to perform porous simultaneous tooth attack operations.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
