污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
德國恩德斯豪斯E+H專營
德國恩德斯豪斯E+H專營
暫無信息 |
流量計適用于經濟型測量和常用氣體的簡單監測Thet-massA150流量計專門適用于經濟型測量和常用氣體的簡單監測，特別應用于壓縮空氣
適合小口徑中空氣、氮氣、二氧化碳和氬氣的測量
優化過程監測：即使在低壓和低流速中也能方便的測量
經濟型測量：安裝簡便，壓損可忽略不計，免維護
可靠流量趨勢：多變量測量
快速有效調試：引導式操作菜單
高工廠適應性：自診斷和錯誤監測
自動恢復數據，便于服務
該測量原理具有高可操作測量范圍，能直接測量質量流量
適用于小口徑管道內的空氣、氮氣、二氧化碳和氬氣測量
儀表特性
插入型適用于公稱管徑為 DN 15～ 50 (1/2 ～ 2")的管道
過程壓力可達 PN 40, Class 300
多種過程連接形式可選
一體化型帶 DC 24 V 電源供電
4-20 mA HART, 脈沖／頻率／開關量輸出
緊湊和堅固的變送器
| 測量原理 | 熱式質量流量計 | |
| 產品標題 | The flowmeter for cost‐effective measurement and easy monitoring of utility gases. Suitable for air, nitrogen, carbon dioxide and argon in small line sizes. | |
| 傳感器特點 | Optimal process monitoring – easy measurement even at low pressures and flow velocities. Costeffective measurement – easy installation, negligible pressure loss and maintenance‐free. Reliable flow trending – m*riable measurement. Inline version: nominal diameter DN 15 to 50 (½ to 2"). Process pressure up to PN 40, Class 300. | |
| 變送器特點 | Fast and efficient commissioning – guided operating menus. High plant availability – self‐diagnostics and error monitoring. Automatic recovery of data for servicing. Device in compact version with DC 24 V power supply. 4‐20 mA HART, pulse/frequency/switch output. | |
| 公稱口徑范圍 | DN 15 to 50 (½ to 2") | |
| 接液部件材質 | Transducer: 1.4404 (316L) Insertion tube: 1.4404 (316L) Measuring tube: 1.4404 (316L); 1.4435 (316L) Connection: 1.4404 (F316/F316L); 1.4404 (316L); 1.4435 (316L) | |
| 測量變量 | Mass flow, temperature, corrected volume flow, FAD volume flow | |
| *大測量誤差 | 3 % o.r. 4 % o.r. 5 % o.f.s. (depending on chosen option of ordering feature "Calibration flow") | |
| 測量范圍 | 0.5 to 910 kg/h (1.1 to 2002 lb/h) 0.5 to 1365 kg/h (1.1 to 3003 lb/h) (for air, depending on chosen option of ordering feature "Calibration flow") | |
| *大過程壓力 | PN 40, Class 300 | |
| 介質溫度范圍 | –40 to +100 °C (–40 to +212 °F) | |
| 環境溫度范圍 | –40 to +60 °C (–40 to +140 °F) | |
| 變送器外殼材質 | AlSi10Mg, coated | |
| 防護等級 | IP66/67, type 4X enclosure | |
| 顯示/操作 | 4‐line display with push Buttons Configuration via local display and operating tools possible | |
| 輸出 | 4‐20 mA HART (active) Pulse/frequency/switch output (passive) | |
| 輸入 | Status input | |
| 數字式通信 | HART | |
| 電源 | DC 18 to 30 V | |
| 危險區認證 | ATEX, IECEx, cCSAus | |
| 計量認證和證書 | Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR | |
| 壓力認證和證書 | PED, CRN | |
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
