當前位置：常州市成豐流量儀表有限公司>>bimetallic thermometers>>bimetallic thermometers

bimetallic thermometers

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質經銷商

所在地常州市

在線詢價收藏產品查看聯系電話

聯系方式：李俊查看聯系方式

更新時間：2024-12-09 11:40:51瀏覽次數：26次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  bimetallic thermometers

全部產品列表

暫無信息

常州市成豐流量儀表有限公司

經營模式：經銷商

商鋪產品：166條

所在地區：江蘇

聯系人：李俊（經理）

詢價 給他留言

產品簡介

bimetallic thermometers

詳細介紹

Summary
The bimetallic thermometer is a on site measurement instrument suitable for measuring middle and high temperature, and can be used to measure directly the temperature of gasses and liquids. Compared with glass thermometer, it is featured with no mercury harmness, distinct reading, strong and durable and other advantages. Our company produces multipurpose bimetallic thermometers. The types and models are complete. The quality is high and reliable. It can be used widely in industry, agriculture, national defence and scientific research etc.
Structure features and working principle
Bimetallic thermometer (hereafter referred to as simply thermometer) is a coiling thermal bimetal temperature sensor. One end is fixed inside the protective sleeve (fixed end) and another end (free end) is connected at a fine axle. The axle end is equipped with a needle. When the temperature changes, the free end of the temperature sensor rotates, hereupon, the fine axle moves the needle. The dial plate indicates the temperature change. The steering drive mechanism in the straight meter moves the needle. The meter housing is made of steel plate, cast aluminium alloy and stainless steel. For the head of the adjustable angle thermometer, by means of corrugated pipe, angle machenism and other parts, the angle can be adjusted freely from the angle type to straight type, or from the straight type to angle type. The electric contact bimetallic thermometer is added with electrical contacts, adjusting devices, outlet box etc. When the temperature fluctuates, at the moment when the needle (moving contact) and the pre-established temperature control contact (upper limit or lower limit) are connected or disconnected, the relay or the contactor in the control circuit moves, thereby, realizing automatic temperature control or producing alarm


WSS Series bimetallic thermometers		Main technical parameters
((1)Accuracy class: 1.5； (2) Time constant:Jacket pipe diameter d=6mm <30s； d=8、10、12mm <40s； (3) The nominal pressure of jacket pipe: 6.4 MPa（Static pressure)； (4)Jacket pipe material:1Cr18Ni9Ti.

Table 1
Type	Model	Dial plate nominal diameter(mm)	Measuring range(℃)	Value of division(℃)	Insert length (mm)	Jacket pipe diameter(mm)	Installation thread(mm)	Housing material
Angle type	WSS－301 WSS－302	60	-80～+40 -40～+80	2	75 100 150 200 250 300 Note:311，0～50℃,L=75 can't be made	6	Movable external thread M16×1.5 Movable internal thread M16×1.5	Steel plate
	WSS－301A WSS－302A		0～50	1				Cast aluminum alloy
			0～100 0～150	2
Straight type	WSS－311A WSS－312A		0～200 0～300	5
Angle type	WSS－401 WSS－402	100	-80～+40 -40～+80	2	75 100 150 200 250 300 400 500 750 1000 1250 1500 1750 2000	8 10 12	Movable external thread M16×1.5 Movable internal thread M16×1.5	Steel plate
	WSS－401A WSS－402A							Cast aluminum alloy
Straight type	WSS－411 WSS－412							Steel plate
	WSS－411A WSS－412A							Cast aluminum alloy
Angle type	WSS－501 WSS－502	150	0～50	1				Steel plate
	WSS－501A WSS－502A		0～100 0～150	2				Cast aluminum alloy
Straight type	WSS－511 WSS－512		0～200 0～300	5				Steel plate
	WSS－511A WSS－512A							Cast aluminum alloy
Adjustable angle type	WSS－463	100	0～400 0～500	10	200 250 300 400 500	6	Fixed thread R1/2	Stainless steel plate
	WSS－461 WSS－462				75 100 150 200 250 300 400 500 750 1000 1250 1500 1750 2000	10 12	Movable external thread M16×1.5 Movable internal thread M16×1.5	Stainless steel plate
	WSS－461A WSS－462A							Cast aluminum alloy

Note:
A Jacket pipe material: 1Crl8Ni9Ti, if other material is required, that shall be noted.
B Other installation thread required needs to be negotiated separately.
C The flange standards and specifications shall be provided in the flanged connection.
D The nominal diameter of the thermometer dial scale is Ф100. The insert length for Ф150 is:
1) When the jacket diameter is Ф8, the insert length range is 75～500mm;
2) When the jacket diameter is Ф10, the insert length range is 75～1000mm;
3) When the jacket diameter isФ12,the insert length range is 1250～2000mm.
E The requirement on other jacket diameters shall be negotiated separately.