PMD(DMC) series jet-pulse unit bag filter is applicable for dust collecting in various sections, such as crushing, conveying, elevating, proportioning, silo top, silo bottom and bulk cement. It could operate continuously without necessity to stop the equipment for removing dust.
The dust collector could be erectly in different ways: without hopper and bracing(B model); with hopper and long bracing(A model); Fans can be set in 90°and 0°angles depending on requirements.
Pressure of compressed air should be ensured within0.5-0.7MPA,or else operation for removing dust would not be efficient.
Use the material such as carbon steel, stainless steel filter ontology.
DMC脈沖單機除塵器,長沙麥迪除塵器*
【特點介紹Characteristics】
采用兩側開門或者頂部蓋板,檢修更換濾袋方便
濾袋座與文丘里管的固定采用螺紋連接形式,濾袋骨架與袋座采用彈性連接,拆裝方便
采用微機自動控制清灰
安裝有防濾袋脫落網,更適合庫頂使用
Set doors at both sides or overhead for convenient maintenance and replacement of bag.
Base for filter bag and Venturi pipe are fixed through threaded connection. Cage and base are connected flexibly for easy dismounting and assembly.
Dust removal is controlled by computer automatically.
A net is installed to avoid bag’s falling down to silo. It is more suitable for operation on top of silo.