EH Series 100 Watt Regulated High Voltage DC Power Supplies.The EH Series combines the performance o...
詳細介紹
Glassman EH系列高壓電源
EH Series 100 Watt Regulated High Voltage DC Power Supplies.The EH Series combines the performance of a laboratory-grade power supply with the added flexibility of remote programming and monitoring capabilities.Voltage ranges are from 0 to 1 kV through 0 to 60 kV. Panel height is 3.5 inches and maximum weight is 13 lbs.
Glassman EH系列高壓電源特點
From 5% to 99% rated voltage. All units operate down to zero output with very slight degradation of performance.
INPUT: 105-125 V RMS standard, single-phase,48-420 Hz, <1.5 A. Connector per IEC 320/C14 with mating line cord. EFFICIENCY: Better than 75% at full load. OUTPUT: Continuous, stable adjustment from 0 to rated voltage/current by external 0 to +10 V signal, external potentiometers, or panel-mounted 10-turn potentiometers with 0.05% resolution. Accuracy, 1% rated + 1% setting. Repeatability better than 0.1% fs. STORED ENERGY: 200 millijoules, 10 kV model; 1 Joule, 50 kV model. VOLTAGE REGULATION: Better than 0.005% +1 mV/mA from no-load to full load and over specified input range. RIPPLE: <0.03% RMS of rated voltage + 0.5 V at full load. CURRENT REGULATION: Better than 0.05% from short circuit to rated voltage at any load condition. VOLTAGE MONITOR: 0 to +10 V equivalent to 0 to rated voltage. Accuracy, 1% reading + 1% rated. CURRENT MONITOR: 0 to +10 V equivalent to 0 to rated current. Accuracy, 1% reading + 0.05% rated. Reversible models 1% of reading +0.1% of rated.
STABILITY:
0.01% per hour after 1/2 hour warmup, 0.05% per 8 hours.
VOLTAGE RISE/DECAY TIME CONSTANT: 60 ms typical (100 ms max.) with a 75% resistive load using either TTL on/off or remote control. TEMPERATURE COEFFICIENT: 0.01% per degree C. AMBIENT TEMPERATURE: -20 to +60 degree C, operating; -40 to +85 degree C, storage. POLARITY: Available either positive, negative, or reversible with respect to chassis ground. PROTECTION: Automatic current regulation protects against all overloads, including arcs and shorts. Fuses, surge-limiting resistors,and low energy components provide ultimate protection. REMOTE CONTROLS: Terminal block provided for all remote functions, including common, +10 V reference, interlock, voltage and current program/monitor, TTL, ground, and local control. EXTERNAL INTERLOCK: Open off, closed on. TTL ENABLE/DISABLE: 0-1.5 V off, 2.5-15 V on.